Axial sleeve assembly tool

Axial sleeve assembly tool



Axial sleeve assembly tool is now available for saw unit 411, 418 and 518. The axial sleeve assembly tool is used for tightening and loosening the bearing of the saw unit. This is done by mounting the tool on the axial sleeve, as seen below. The tool has four pins that should be mounted accordingly to fit the four holes in the axial sleeve. When tightening or loosening the axial sleeve use a 30 mm socket/wrench.

Axial sleeve assembly tool part no: #032129


For more information please contact your local Log Max dealer.


Alternative measuring wheels
Alternative measuring wheels

Kits with alternative length measuring wheels   Considering the many different circumstances which may have an impact on length measuring Log Max now provides kits with alternative length measuring wheels. New heads will still be deliv [ ... ]

Read more...
Hultdins SuperCut 30 cc
Hultdins SuperCut 30 cc

New saw option for Log Max 5000, 6000, 6000Twin, 7000 and 7000Twin   The all new Hultdins SuperCut 30 cc equipped with a saw motor from Parker deliverers a higher torque and better efficiency. The motor is optimized for saw application [ ... ]

Read more...
New casted processor knives
New casted processor knives

Cast processor knives with welded tips   Log Max releases a new delimbing knife option for Log Max 6000B and 6000Twin. The new casted processor knives with welded tips are designed for the best possible result when working on deck. The [ ... ]

Read more...
New welded upper knife
New welded upper knife

New upper knife with replaceable knife edge   Log Max is introducing a new upper knife to the models Log Max E6, 6000Twin, 7000Twin and Log Max 7000XT. The knife is welded and has a replaceable knife edge. Thanks to this the upper knif [ ... ]

Read more...