Hultdins SuperCut 30 cc

New saw option for Log Max 5000, 6000, 6000Twin, 7000 and 7000Twin

 

The all new Hultdins SuperCut 30 cc equipped with a saw motor from Parker deliverers a higher torque and better efficiency. The motor is optimized for saw applications and equipped with Power Boost which can deliver up to 5 kW more power plus a valve plate optimized for high rpms.

As usual for the SuperCut models the key features are a built in saw bar feeder without exposed cylinder rod. Automatic chain tensioner is standard and the number of hoses in the saw box has been eliminated thanks to built-in oil channels.

The following sword models fits the new SuperCut 30 cc:

Saw bar holder: Length: Sprocket: Chain: Link count: Stump treatment: Article nr.:
#18 60  Z=18  18H  76  No 554196
#18 67,5  Z=18  18H  83  No 554196
#18 75  Z=18  18H  90  No 554196
#19 82  Z=18  18H  98  No 554197
#19 90  Z=18  18H  106  No 554197
#20 60  Z=18  18H  76  Yes 554198
#20 67,5  Z=18  18H  83  Yes 554198
#20 75  Z=18  18H  90  Yes 554198
#21 82  Z=18  18H  98  Yes 554199
#21 90  Z=18  18H  106  Yes 554199

Rebuild kit
Log Max heads with Hultdins SuperCut 19 cc can be rebuilt on site with the new 30 cc motor by ordering the kit nr; 032172 for Log Max 5000, 032173 for Log Max 6000, 032174 for Log Max 7000. Note that the kits does not contain saw bar holders or saw bars which are ordered separately.

Note
The possibility to use the 30 cc motor applies to saw units starting at serial number 035-13386 which are found on Log Max heads newer than summer 2014. Heads with older saw units have to exchange the whole saw unit.

For more information please contact your local Log Max dealer.

Alternative measuring wheels
Alternative measuring wheels

Kits with alternative length measuring wheels   Considering the many different circumstances which may have an impact on length measuring Log Max now provides kits with alternative length measuring wheels. New heads will still be deliv [ ... ]

Read more...
Hultdins SuperCut 30 cc
Hultdins SuperCut 30 cc

New saw option for Log Max 5000, 6000, 6000Twin, 7000 and 7000Twin   The all new Hultdins SuperCut 30 cc equipped with a saw motor from Parker deliverers a higher torque and better efficiency. The motor is optimized for saw application [ ... ]

Read more...
New casted processor knives
New casted processor knives

Cast processor knives with welded tips   Log Max releases a new delimbing knife option for Log Max 6000B and 6000Twin. The new casted processor knives with welded tips are designed for the best possible result when working on deck. The [ ... ]

Read more...
New welded upper knife
New welded upper knife

New upper knife with replaceable knife edge   Log Max is introducing a new upper knife to the models Log Max E6, 6000Twin, 7000Twin and Log Max 7000XT. The knife is welded and has a replaceable knife edge. Thanks to this the upper knif [ ... ]

Read more...
Updated lower delimbing knives
Updated lower delimbing knives

Lower delimbing knives on Log Max E6 updated   Log Max has updated the lower delimbing knives for Log Max E6. The new update includes several improvements, updated knife edge, new knife edge outline, additional material to the knife bo [ ... ]

Read more...
Updated feed roller arms
Updated feed roller arms

Feed roller arms for Log Max 10000XT updated.   Log Max is now introducing updated feed roller arms for Log Max 10000 XT. The updated feed roller arms has received an overhaul in the attachment areas. Additional material has been added [ ... ]

Read more...
Welded measuring wheel arm
Welded measuring wheel arm

New optional welded measuring wheel arm   Log Max is now introducing an alternative measuring wheel arm for Log Max 6000B, 6000Twin. The optional measuring wheel arm is welded instead of the standard measuring wheel arm which is casted [ ... ]

Read more...
New hose guard available
New hose guard available

A new hose guard is available   A new hose guard is now available for Log Max 6000B and 7000C harvesting heads. This hose guard will help to prevent damage or tangling of the hoses. This new hose guard is specially developed for  [ ... ]

Read more...
Bosch Rexroth MCR 5-F
Bosch Rexroth MCR 5-F

New roller motor MCR 5-F Bosch Rexroth for forest application   Log Max is now introducing a new roller motor for Log Max 5000D. It has several new features that improves the durability. The roller motor is available in two different v [ ... ]

Read more...
Drainage holes on feed rollers
Drainage holes on feed rollers

Updated drainage holes on feed rollers   Log Max is now introducing updated feed rollers with more and bigger drainage holes. This update is a general update that applies on all feed rollers for the heads listed below. The additional d [ ... ]

Read more...
Saw dust protection kit
Saw dust protection kit

Saw dust protection kit update   Log Max is now introducing an updated saw dust protection kit for the new chain shot guard. The new saw dust protection kit has been redesigned to be able to mount together with the new chain shot guard [ ... ]

Read more...
Updated protective covers
Updated protective covers

Updated protective covers   Log Max is now introducing updated protective covers for roller arm cylinder rods. This is a general update that applies on all protective covers for wheel arm cylinder rods, see the list below for which hea [ ... ]

Read more...
New field repair kits

Log Max field repair kits updated Log Max is now introducing new field repair kits for all Log Max heads. All field repair kits have been revised and updated. The new field repair kits will be introduced from date 2014-01-01. General changes [ ... ]

Read more...
Attachment plate for felling link
Attachment plate for felling link

Attachment plate for felling link #039020 and #043021   An attachment plate is now available for felling link #039020 and #042021. This attachment plate is welded to the back of the felling link and therefore makes it possible to attac [ ... ]

Read more...
Updated reinforced felling link
Updated reinforced felling link

Updates to reinforced felling link #043021   Log Max has now updated the reinforced felling link #043021. The update makes it possible to fit a chain holder or a hose holder with rotation plate on the felling link. Chain holder is stan [ ... ]

Read more...
Log Mate 500 Spare parts kit
Log Mate 500 Spare parts kit

Spare parts kit for dealers and customers with Log Max 500.   Log Max is now introducing a spare parts kit for dealers with customers that has Log Mate 500.
Spare part kit #045525 consists of two boxes that includes the most relevant p [ ... ]

Read more...
New accumulation unit for Log Max 6000
New accumulation unit for Log Max 6000

New accumulation unit for Log Max 6000   A new accumulation unit is now available for Log Max 6000. The new accumulation unit’s size and weight has been optimized for Log Max 6000. The accumulation unit is equipped with the new suppo [ ... ]

Read more...
Updates to electrically controlled measuring wheel
Updates to electrically controlled measuring wheel

New manifold and valve for electrically controlled measuring wheel   A new manifold and valve are now being introduced to the electrically controlled measuring wheel (e.c.m. wheel) accessory. The new manifold and valve will reduce oil  [ ... ]

Read more...
Other Articles